PeerGroup (bitcoinj 0.11.2 API)

java.lang.Object
- com.google.common.util.concurrent.AbstractExecutionThreadService
- - com.google.bitcoin.core.PeerGroup

All Implemented Interfaces:

TransactionBroadcaster, com.google.common.util.concurrent.Service
```
public class PeerGroup
extends com.google.common.util.concurrent.AbstractExecutionThreadService
implements TransactionBroadcaster
```
Runs a set of connections to the P2P network, brings up connections to replace disconnected nodes and manages the interaction between them all. Most applications will want to use one of these.

PeerGroup tries to maintain a constant number of connections to a set of distinct peers. Each peer runs a network listener in its own thread. When a connection is lost, a new peer will be tried after a delay as long as the number of connections less than the maximum.

Connections are made to addresses from a provided list. When that list is exhausted, we start again from the head of the list.

The PeerGroup can broadcast a transaction to the currently connected set of peers. It can also handle download of the blockchain from peers, restarting the process when peers die.

PeerGroup implements the Service interface. This means before it will do anything, you must call the Service.start() method (which returns a future) or Service.startAndWait() method, which will block until peer discovery is completed and some outbound connections have been initiated (it will return before handshaking is done, however). You should call Service.stop() when finished. Note that not all methods of PeerGroup are safe to call from a UI thread as some may do network IO, but starting and stopping the service should be fine.

Nested Class Summary

Nested Classes
Modifier and Type Class and Description

static class PeerGroup.FilterRecalculateMode
- Nested classes/interfaces inherited from interface com.google.common.util.concurrent.Service
  com.google.common.util.concurrent.Service.Listener, com.google.common.util.concurrent.Service.State

Nested Classes
Modifier and Type	Class and Description
`static class`	`PeerGroup.FilterRecalculateMode`

Field Summary

Fields
Modifier and Type	Field and Description
`static double`	`DEFAULT_BLOOM_FILTER_FP_RATE` A reasonable default for the bloom filter false positive rate on mainnet.
`static int`	`DEFAULT_CONNECT_TIMEOUT_MILLIS` The default timeout between when a connection attempt begins and version message exchange completes
`static long`	`DEFAULT_PING_INTERVAL_MSEC` How many milliseconds to wait after receiving a pong before sending another ping.
`protected ReentrantLock`	`lock`
`static double`	`MAX_FP_RATE_INCREASE` Maximum increase in FP rate before forced refresh of the bloom filter

Constructor Summary

Constructors
Constructor and Description
`PeerGroup(NetworkParameters params)` Creates a PeerGroup with the given parameters.
`PeerGroup(NetworkParameters params, AbstractBlockChain chain)` Creates a PeerGroup for the given network and chain.
`PeerGroup(NetworkParameters params, AbstractBlockChain chain, ClientConnectionManager connectionManager)` Creates a new PeerGroup allowing you to specify the `ClientConnectionManager` which is used to create new connections and keep track of existing ones.

Method Summary

Methods
Modifier and Type	Method and Description
`void`	`addAddress(InetAddress address)` Convenience method for addAddress(new PeerAddress(address, params.port));
`void`	`addAddress(PeerAddress peerAddress)` Add an address to the list of potential peers to connect to.
`void`	`addEventListener(PeerEventListener listener)` Same as `addEventListener(PeerEventListener, java.util.concurrent.Executor)` but defaults to running on the user thread.
`void`	`addEventListener(PeerEventListener listener, Executor executor)` Adds a listener that will be notified on the given executor when:
`void`	`addPeerDiscovery(PeerDiscovery peerDiscovery)` Add addresses from a discovery source to the list of potential peers to connect to.
`void`	`addPeerFilterProvider(PeerFilterProvider provider)` Link the given PeerFilterProvider to this PeerGroup.
`void`	`addWallet(Wallet wallet)` Link the given wallet to this PeerGroup.
`com.google.common.util.concurrent.ListenableFuture<Transaction>`	`broadcastTransaction(Transaction tx)` Calls `broadcastTransaction(Transaction,int)` with getMinBroadcastConnections() as the number of connections to wait for before commencing broadcast.
`com.google.common.util.concurrent.ListenableFuture<Transaction>`	`broadcastTransaction(Transaction tx, int minConnections)` Given a transaction, sends it un-announced to one peer and then waits for it to be received back from other peers.
`void`	`clearEventListeners()` Removes all event listeners simultaneously.
`Peer`	`connectTo(InetSocketAddress address)` Connect to a peer by creating a channel to the destination address.
`protected Peer`	`connectTo(PeerAddress address, boolean incrementMaxConnections)`
`protected void`	`connectToAnyPeer()` Picks a peer from discovery and connects to it.
`protected void`	`discoverPeers()`
`void`	`downloadBlockChain()` Download the blockchain from peers.
`List<Peer>`	`getConnectedPeers()` Returns a newly allocated list containing the currently connected peers.
`Peer`	`getDownloadPeer()` Returns the currently selected download peer.
`long`	`getFastCatchupTimeSecs()` Returns the current fast catchup time.
`int`	`getMaxConnections()` The maximum number of connections that we will create to peers.
`MemoryPool`	`getMemoryPool()` Returns the `MemoryPool` created by this peer group to synchronize its peers.
`int`	`getMinBroadcastConnections()` Returns the number of connections that are required before transactions will be broadcast.
`int`	`getMinRequiredProtocolVersion()` The minimum protocol version required: defaults to the version required for Bloom filtering.
`int`	`getMostCommonChainHeight()` Returns our peers most commonly reported chain height.
`static int`	`getMostCommonChainHeight(List<Peer> peers)` Returns most commonly reported chain height from the given list of `Peer`s.
`List<Peer>`	`getPendingPeers()` Returns a list containing Peers that did not complete connection yet.
`long`	`getPingIntervalMsec()` Returns the period between pings for an individual peer.
`VersionMessage`	`getVersionMessage()` Returns the version message provided by setVersionMessage or a default if none was given.
`protected void`	`handleNewPeer(Peer peer)`
`protected void`	`handlePeerDeath(Peer peer)`
`int`	`numConnectedPeers()` Returns the number of currently connected peers.
`void`	`recalculateFastCatchupAndFilter(PeerGroup.FilterRecalculateMode mode)` Recalculates the bloom filter given to peers as well as the timestamp after which full blocks are downloaded (instead of only headers).
`boolean`	`removeEventListener(PeerEventListener listener)` The given event listener will no longer be called with events.
`void`	`removeWallet(Wallet wallet)` Unlinks the given wallet so it no longer receives broadcast transactions or has its transactions announced.
`protected void`	`run()`
`protected Peer`	`selectDownloadPeer(List<Peer> peers)` Given a list of Peers, return a Peer to be used as the download peer.
`void`	`setBloomFilterFalsePositiveRate(double bloomFilterFPRate)` Sets the false positive rate of bloom filters given to peers.
`void`	`setConnectTimeoutMillis(int connectTimeoutMillis)` Sets the timeout between when a connection attempt to a peer begins and when the version message exchange completes.
`void`	`setFastCatchupTimeSecs(long secondsSinceEpoch)` Tells the PeerGroup to download only block headers before a certain time and bodies after that.
`void`	`setMaxConnections(int maxConnections)` Adjusts the desired number of connections that we will create to peers.
`void`	`setMinBroadcastConnections(int value)` See `getMinBroadcastConnections()`.
`void`	`setMinRequiredProtocolVersion(int minRequiredProtocolVersion)` If a peer is connected to that claims to speak a protocol version lower than the given version, it will be disconnected and another one will be tried instead.
`void`	`setPingIntervalMsec(long pingIntervalMsec)` Sets the period between pings for an individual peer.
`void`	`setUserAgent(String name, String version)` Sets information that identifies this software to remote nodes.
`void`	`setUserAgent(String name, String version, String comments)` Sets information that identifies this software to remote nodes.
`void`	`setVersionMessage(VersionMessage ver)` Sets the `VersionMessage` that will be announced on newly created connections.
`protected void`	`shutDown()`
`void`	`startBlockChainDownload(PeerEventListener listener)` Start downloading the blockchain from the first available peer.
`protected void`	`startUp()`
`protected void`	`triggerShutdown()`
`com.google.common.util.concurrent.ListenableFuture<PeerGroup>`	`waitForPeers(int numPeers)` Returns a future that is triggered when the number of connected peers is equal to the given number of connected peers.

Methods inherited from class com.google.common.util.concurrent.AbstractExecutionThreadService
addListener, executor, getServiceName, isRunning, start, startAndWait, state, stop, stopAndWait, toString

Methods inherited from class java.lang.Object
clone, equals, finalize, getClass, hashCode, notify, notifyAll, wait, wait, wait

- Field Detail
  - lock
```
protected final ReentrantLock lock
```
  - DEFAULT_PING_INTERVAL_MSEC
```
public static final long DEFAULT_PING_INTERVAL_MSEC
```
    How many milliseconds to wait after receiving a pong before sending another ping.
    
    See Also:
    Constant Field Values
  - DEFAULT_BLOOM_FILTER_FP_RATE
```
public static final double DEFAULT_BLOOM_FILTER_FP_RATE
```
    A reasonable default for the bloom filter false positive rate on mainnet. FP rates are values between 0.0 and 1.0 where 1.0 is "all transactions" i.e. 100%.
    
    Users for which low data usage is of utmost concern, 0.0001 may be better, for users to whom anonymity is of utmost concern, 0.001 (0.1%) should provide very good privacy.
    
    See Also:
    Constant Field Values
  - MAX_FP_RATE_INCREASE
```
public static final double MAX_FP_RATE_INCREASE
```
    Maximum increase in FP rate before forced refresh of the bloom filter
    
    See Also:
    Constant Field Values
  - DEFAULT_CONNECT_TIMEOUT_MILLIS
```
public static final int DEFAULT_CONNECT_TIMEOUT_MILLIS
```
    The default timeout between when a connection attempt begins and version message exchange completes
    
    See Also:
    Constant Field Values
- Constructor Detail
  - PeerGroup
```
public PeerGroup(NetworkParameters params)
```
    Creates a PeerGroup with the given parameters. No chain is provided so this node will report its chain height as zero to other peers. This constructor is useful if you just want to explore the network but aren't interested in downloading block data.
    
    Parameters:
    params - Network parameters
  - PeerGroup
```
public PeerGroup(NetworkParameters params,
         @Nullable
         AbstractBlockChain chain)
```
    Creates a PeerGroup for the given network and chain. Blocks will be passed to the chain as they are broadcast and downloaded. This is probably the constructor you want to use.
  - PeerGroup
```
public PeerGroup(NetworkParameters params,
         @Nullable
         AbstractBlockChain chain,
         ClientConnectionManager connectionManager)
```
    Creates a new PeerGroup allowing you to specify the ClientConnectionManager which is used to create new connections and keep track of existing ones.
- Method Detail
  - setMaxConnections
```
public void setMaxConnections(int maxConnections)
```
    Adjusts the desired number of connections that we will create to peers. Note that if there are already peers open and the new value is lower than the current number of peers, those connections will be terminated. Likewise if there aren't enough current connections to meet the new requested max size, some will be added.
  - getMaxConnections
```
public int getMaxConnections()
```
    The maximum number of connections that we will create to peers.
  - setVersionMessage
```
public void setVersionMessage(VersionMessage ver)
```
    Sets the VersionMessage that will be announced on newly created connections. A version message is primarily interesting because it lets you customize the "subVer" field which is used a bit like the User-Agent field from HTTP. It means your client tells the other side what it is, see BIP 14. The VersionMessage you provide is copied and the best chain height/time filled in for each new connection, therefore you don't have to worry about setting that. The provided object is really more of a template.
  - getVersionMessage
```
public VersionMessage getVersionMessage()
```
    Returns the version message provided by setVersionMessage or a default if none was given.
  - setUserAgent
```
public void setUserAgent(String name,
                String version,
                @Nullable
                String comments)
```
    Sets information that identifies this software to remote nodes. This is a convenience wrapper for creating a new VersionMessage, calling VersionMessage.appendToSubVer(String, String, String) on it, and then calling setVersionMessage(VersionMessage) on the result of that. See the docs for VersionMessage.appendToSubVer(String, String, String) for information on what the fields should contain.
  - setUserAgent
```
public void setUserAgent(String name,
                String version)
```
    Sets information that identifies this software to remote nodes. This is a convenience wrapper for creating a new VersionMessage, calling VersionMessage.appendToSubVer(String, String, String) on it, and then calling setVersionMessage(VersionMessage) on the result of that. See the docs for VersionMessage.appendToSubVer(String, String, String) for information on what the fields should contain.
  - addEventListener
```
public void addEventListener(PeerEventListener listener,
                    Executor executor)
```
    Adds a listener that will be notified on the given executor when:
    1. New peers are connected to.
    2. Peers are disconnected from.
    3. A message is received by the download peer (there is always one peer which is elected as a peer which will be used to retrieve data).
    4. Blocks are downloaded by the download peer.
  - addEventListener
```
public void addEventListener(PeerEventListener listener)
```
    Same as addEventListener(PeerEventListener, java.util.concurrent.Executor) but defaults to running on the user thread.
  - removeEventListener
```
public boolean removeEventListener(PeerEventListener listener)
```
    The given event listener will no longer be called with events.
  - clearEventListeners
```
public void clearEventListeners()
```
    Removes all event listeners simultaneously. Note that this includes listeners added internally by the framework so it's generally not advised to use this - it exists for special purposes only.
  - getConnectedPeers
```
public List<Peer> getConnectedPeers()
```
    Returns a newly allocated list containing the currently connected peers. If all you care about is the count, use numConnectedPeers().
  - getPendingPeers
```
public List<Peer> getPendingPeers()
```
    Returns a list containing Peers that did not complete connection yet.
  - addAddress
```
public void addAddress(PeerAddress peerAddress)
```
    Add an address to the list of potential peers to connect to. It won't necessarily be used unless there's a need to build new connections to reach the max connection count.
    
    Parameters:
    peerAddress - IP/port to use.
  - addAddress
```
public void addAddress(InetAddress address)
```
    Convenience method for addAddress(new PeerAddress(address, params.port));
  - addPeerDiscovery
```
public void addPeerDiscovery(PeerDiscovery peerDiscovery)
```
    Add addresses from a discovery source to the list of potential peers to connect to. If max connections has not been configured, or set to zero, then it's set to the default at this point.
  - discoverPeers
```
protected void discoverPeers()
                      throws PeerDiscoveryException
```
    Throws:
    
    PeerDiscoveryException
  - run
```
protected void run()
            throws Exception
```
    Specified by:
    
    run in class com.google.common.util.concurrent.AbstractExecutionThreadService
    
    Throws:
    
    Exception
  - connectToAnyPeer
```
protected void connectToAnyPeer()
                         throws PeerDiscoveryException
```
    Picks a peer from discovery and connects to it. If connection fails, picks another and tries again.
    
    Throws:
    
    PeerDiscoveryException
  - startUp
```
protected void startUp()
                throws Exception
```
    Overrides:
    
    startUp in class com.google.common.util.concurrent.AbstractExecutionThreadService
    
    Throws:
    
    Exception
  - shutDown
```
protected void shutDown()
                 throws Exception
```
    Overrides:
    
    shutDown in class com.google.common.util.concurrent.AbstractExecutionThreadService
    
    Throws:
    
    Exception
  - triggerShutdown
```
protected void triggerShutdown()
```
    Overrides:
    
    triggerShutdown in class com.google.common.util.concurrent.AbstractExecutionThreadService
  - addWallet
```
public void addWallet(Wallet wallet)
```
    Link the given wallet to this PeerGroup. This is used for three purposes:
    1. So the wallet receives broadcast transactions.
    2. Announcing pending transactions that didn't get into the chain yet to our peers.
    3. Set the fast catchup time using setFastCatchupTimeSecs(long), to optimize chain download.
    Note that this should be done before chain download commences because if you add a wallet with keys earlier than the current chain head, the relevant parts of the chain won't be redownloaded for you.
    
    The Wallet will have an event listener registered on it, so to avoid leaks remember to use removeWallet(Wallet) on it if you wish to keep the Wallet but lose the PeerGroup.
  - addPeerFilterProvider
```
public void addPeerFilterProvider(PeerFilterProvider provider)
```
    Link the given PeerFilterProvider to this PeerGroup. DO NOT use this for Wallets, use addWallet(Wallet) instead.
    
    Note that this should be done before chain download commences because if you add a listener with keys earlier than the current chain head, the relevant parts of the chain won't be redownloaded for you.
  - removeWallet
```
public void removeWallet(Wallet wallet)
```
    Unlinks the given wallet so it no longer receives broadcast transactions or has its transactions announced.
  - recalculateFastCatchupAndFilter
```
public void recalculateFastCatchupAndFilter(PeerGroup.FilterRecalculateMode mode)
```
    Recalculates the bloom filter given to peers as well as the timestamp after which full blocks are downloaded (instead of only headers).
    
    Parameters:
    mode - In what situations to send the filter to connected peers.
  - setBloomFilterFalsePositiveRate
```
public void setBloomFilterFalsePositiveRate(double bloomFilterFPRate)
```
    Sets the false positive rate of bloom filters given to peers. The default is DEFAULT_BLOOM_FILTER_FP_RATE.
    
    Be careful regenerating the bloom filter too often, as it decreases anonymity because remote nodes can compare transactions against both the new and old filters to significantly decrease the false positive rate.
    
    See the docs for BloomFilter.BloomFilter(int, double, long, BloomFilter.BloomUpdate) for a brief explanation of anonymity when using bloom filters.
  - numConnectedPeers
```
public int numConnectedPeers()
```
    Returns the number of currently connected peers. To be informed when this count changes, register a PeerEventListener and use the onPeerConnected/onPeerDisconnected methods.
  - connectTo
```
@Nullable
public Peer connectTo(InetSocketAddress address)
```
    Connect to a peer by creating a channel to the destination address. This should not be used normally - let the PeerGroup manage connections through AbstractExecutionThreadService.start()
    
    Parameters:
    address - destination IP and port.
    
    Returns:
    The newly created Peer object or null if the peer could not be connected. Use Peer.getConnectionOpenFuture() if you want a future which completes when the connection is open.
  - connectTo
```
@Nullable
protected Peer connectTo(PeerAddress address,
                      boolean incrementMaxConnections)
```
  - setConnectTimeoutMillis
```
public void setConnectTimeoutMillis(int connectTimeoutMillis)
```
    Sets the timeout between when a connection attempt to a peer begins and when the version message exchange completes. This does not apply to currently pending peers.
  - startBlockChainDownload
```
public void startBlockChainDownload(PeerEventListener listener)
```
    Start downloading the blockchain from the first available peer.
    
    If no peers are currently connected, the download will be started once a peer starts. If the peer dies, the download will resume with another peer.
    
    Parameters:
    listener - a listener for chain download events, may not be null
  - downloadBlockChain
```
public void downloadBlockChain()
```
    Download the blockchain from peers. Convenience that uses a DownloadListener for you.
    This method waits until the download is complete. "Complete" is defined as downloading from at least one peer all the blocks that are in that peer's inventory.
  - handleNewPeer
```
protected void handleNewPeer(Peer peer)
```
  - getMemoryPool
```
public MemoryPool getMemoryPool()
```
    Returns the MemoryPool created by this peer group to synchronize its peers. The pool tracks advertised and downloaded transactions so their confidence can be measured as a proportion of how many peers announced it. With an un-tampered with internet connection, the more peers announce a transaction the more confidence you can have that it's really valid.
  - setFastCatchupTimeSecs
```
public void setFastCatchupTimeSecs(long secondsSinceEpoch)
```
    Tells the PeerGroup to download only block headers before a certain time and bodies after that. Call this before starting block chain download. Do not use a time > NOW - 1 block, as it will break some block download logic.
  - getFastCatchupTimeSecs
```
public long getFastCatchupTimeSecs()
```
    Returns the current fast catchup time. The contents of blocks before this time won't be downloaded as they cannot contain any interesting transactions. If you use addWallet(Wallet) this just returns the min of the wallets earliest key times.
    
    Returns:
    a time in seconds since the epoch
  - handlePeerDeath
```
protected void handlePeerDeath(Peer peer)
```
  - waitForPeers
```
public com.google.common.util.concurrent.ListenableFuture<PeerGroup> waitForPeers(int numPeers)
```
    Returns a future that is triggered when the number of connected peers is equal to the given number of connected peers. By using this with getMaxConnections() you can wait until the network is fully online. To block immediately, just call get() on the result.
    
    Parameters:
    numPeers - How many peers to wait for.
    
    Returns:
    a future that will be triggered when the number of connected peers >= numPeers
  - getMinBroadcastConnections
```
public int getMinBroadcastConnections()
```
    Returns the number of connections that are required before transactions will be broadcast. If there aren't enough, broadcastTransaction(Transaction) will wait until the minimum number is reached so propagation across the network can be observed. If no value has been set using setMinBroadcastConnections(int) a default of half of whatever getMaxConnections() returns is used.
  - setMinBroadcastConnections
```
public void setMinBroadcastConnections(int value)
```
    See getMinBroadcastConnections().
  - broadcastTransaction
```
public com.google.common.util.concurrent.ListenableFuture<Transaction> broadcastTransaction(Transaction tx)
```
    Calls broadcastTransaction(Transaction,int) with getMinBroadcastConnections() as the number of connections to wait for before commencing broadcast.
    
    Specified by:
    
    broadcastTransaction in interface TransactionBroadcaster
  - broadcastTransaction
```
public com.google.common.util.concurrent.ListenableFuture<Transaction> broadcastTransaction(Transaction tx,
                                                                                   int minConnections)
```
    Given a transaction, sends it un-announced to one peer and then waits for it to be received back from other peers. Once all connected peers have announced the transaction, the future will be completed. If anything goes wrong the exception will be thrown when get() is called, or you can receive it via a callback on the ListenableFuture. This method returns immediately, so if you want it to block just call get() on the result.
    
    Note that if the PeerGroup is limited to only one connection (discovery is not activated) then the future will complete as soon as the transaction was successfully written to that peer.
    
    Other than for sending your own transactions, this method is useful if you have received a transaction from someone and want to know that it's valid. It's a bit of a weird hack because the current version of the Bitcoin protocol does not inform you if you send an invalid transaction. Because sending bad transactions counts towards your DoS limit, be careful with relaying lots of unknown transactions. Otherwise you might get kicked off the network.
    
    The transaction won't be sent until there are at least minConnections active connections available. A good choice for proportion would be between 0.5 and 0.8 but if you want faster transmission during initial bringup of the peer group you can lower it.
  - getPingIntervalMsec
```
public long getPingIntervalMsec()
```
    Returns the period between pings for an individual peer. Setting this lower means more accurate and timely ping times are available via Peer.getLastPingTime() but it increases load on the remote node. It defaults to 5000.
  - setPingIntervalMsec
```
public void setPingIntervalMsec(long pingIntervalMsec)
```
    Sets the period between pings for an individual peer. Setting this lower means more accurate and timely ping times are available via Peer.getLastPingTime() but it increases load on the remote node. It defaults to DEFAULT_PING_INTERVAL_MSEC. Setting the value to be <= 0 disables pinging entirely, although you can still request one yourself using Peer.ping().
  - setMinRequiredProtocolVersion
```
public void setMinRequiredProtocolVersion(int minRequiredProtocolVersion)
```
    If a peer is connected to that claims to speak a protocol version lower than the given version, it will be disconnected and another one will be tried instead.
  - getMinRequiredProtocolVersion
```
public int getMinRequiredProtocolVersion()
```
    The minimum protocol version required: defaults to the version required for Bloom filtering.
  - getMostCommonChainHeight
```
public int getMostCommonChainHeight()
```
    Returns our peers most commonly reported chain height. If multiple heights are tied, the highest is returned. If no peers are connected, returns zero.
  - getMostCommonChainHeight
```
public static int getMostCommonChainHeight(List<Peer> peers)
```
    Returns most commonly reported chain height from the given list of Peers. If multiple heights are tied, the highest is returned. If no peers are connected, returns zero.
  - selectDownloadPeer
```
@Nullable
protected Peer selectDownloadPeer(List<Peer> peers)
```
    Given a list of Peers, return a Peer to be used as the download peer. If you don't want PeerGroup to manage download peer statuses for you, just override this and always return null.
  - getDownloadPeer
```
public Peer getDownloadPeer()
```
    Returns the currently selected download peer. Bear in mind that it may have changed as soon as this method returns. Can return null if no peer was selected.

Class PeerGroup

Nested Class Summary

Nested classes/interfaces inherited from interface com.google.common.util.concurrent.Service

Field Summary

Constructor Summary

Method Summary

Methods inherited from class com.google.common.util.concurrent.AbstractExecutionThreadService

Methods inherited from class java.lang.Object

Field Detail

lock

DEFAULT_PING_INTERVAL_MSEC

DEFAULT_BLOOM_FILTER_FP_RATE

MAX_FP_RATE_INCREASE

DEFAULT_CONNECT_TIMEOUT_MILLIS

Constructor Detail

PeerGroup

PeerGroup

PeerGroup

Method Detail

setMaxConnections

getMaxConnections

setVersionMessage

getVersionMessage

setUserAgent

setUserAgent

addEventListener

addEventListener

removeEventListener

clearEventListeners

getConnectedPeers

getPendingPeers

addAddress

addAddress

addPeerDiscovery

discoverPeers

run

connectToAnyPeer

startUp

shutDown

triggerShutdown

addWallet

addPeerFilterProvider

removeWallet

recalculateFastCatchupAndFilter

setBloomFilterFalsePositiveRate

numConnectedPeers

connectTo

connectTo

setConnectTimeoutMillis

startBlockChainDownload

downloadBlockChain

handleNewPeer

getMemoryPool

setFastCatchupTimeSecs

getFastCatchupTimeSecs

handlePeerDeath

waitForPeers

getMinBroadcastConnections

setMinBroadcastConnections

broadcastTransaction

broadcastTransaction

getPingIntervalMsec

setPingIntervalMsec

setMinRequiredProtocolVersion

getMinRequiredProtocolVersion

getMostCommonChainHeight

getMostCommonChainHeight

selectDownloadPeer

getDownloadPeer